Dirt biking is a fun way to explore and engage in outdoor activities. Learning to ride dirt bikes is really easy once you overcome the fear of falling off. It’s like when you first learnt how to ride a bicycle. You’ll need endurance and lots of faith in yourself.
As a beginner, there are steps and things you’ll need to acquaint yourself with before you ever ride these gas dirt bikes. To help out, here are some things to know.
Gearing up for your first ride
Powersport vehicles like gas dirt bikes need safety helmets to help protect the head in case of accidents. This is not a way to put fear in you as you step out but to ensure you’re prepared for any eventuality. A good helmet must have chin guards to protect the chin area during an impact.
For a fast-moving motorcycle, the helmet must have eye protection. This will help protect the eyes from dust, branches, or any other object that can get into the eyes. Apart from a helmet, when riding gas dirt bikes, you’ll also need protective gear for other parts of the body. These gears will include knee protectors, full-body armour, and boots. All of these are a basic necessity before setting out for a ride.
Starting the dirt bike
Before you turn on the dirt bike, it’s good to familiarize yourself with the layout of the bike. You’ll need to know where the brakes, clutch, and shifters are located. There’s no need to assume where they are or use a general dirt bike layout. As a beginner, know the location of all of these important components.
Check for the gas level in the dirt bike. Preferably, keep the gas tank full of gas, so you don’t run out when off-road. Then check the choke and kickstarter. If you’re cold-starting the bike, it may take more than one try to get the bike to turn on.
It’s time to take the dirt bike for a spin, but you’ll have to start by learning how to properly shift gears. Look for an open field and start riding slowly. In all honesty, there’s a lot of difference between shifting gears in theory and when on the bike. There is also no need to be too hard on yourself if things are not going as expected.
Much about shifting gears is listening to the sound of the engine. Like in other vehicles, the revving sound of the engine tells you if you’ll need to step up a gear. The lower the gear, the lower the speed you’ll be riding on. As a beginner, learn to take things slowly.
Like any vehicle, learning braking techniques is as important as learning driving or riding techniques. Most dirt bikes have two brake systems on the front and back wheels. The front-wheel brake is often more sensitive than the back-wheel brake. The location of both brake levers is also in different places.
Ideally, braking with the back wheel brake produces a smoother stop than using the front wheel brake. However, at top speed, a sudden brake with the front wheel may cause the bike to topple over. Knowing when and how to use each brake should be properly understood.
Riding a dirt bike is quite different from other vehicles. In some ways, it may be harder, but with time and practice, you’ll get the hang of it. Be sure to follow the basic safety rules and regulations before heading out for your first ride. Also, take things slow at first as you familiarize yourself with the bike and how it works. With time, you’ll be out and about, enjoying the ride. Thanks for reading!